SEARCH NOW FOR ALL YOUR NIDEC CORP SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Motors/GearBox/Clutch / Gear Head
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
NIDEC CORP
CONTROL TECHNIQUES
CTP322-015/NTE-212-R
GEARHEAD SERVOFIT INLINE RATIO 15:1
✓ IN STOCK!
£462.86
Price with VAT:
£555.43
NIDEC CORP
6H375-21
GEAR HEAD, 2W OUTPUT, 75:1 RATIO
✓ IN STOCK!
£20.44
Price with VAT:
£24.53
Repair Yours
Contact Us
NIDEC CORP
6H3FBN-21
GEAR HEAD, 300RPM, 3:1 RATIO, 2.4X2.4IN FRAME
✓ IN STOCK!
£22.87
Price with VAT:
£27.44
Repair Yours
Contact Us
NIDEC CORP
JAPAN SERVO CO LTD
6H9N-21
GEAR HEAD, 1.2 LB-IN, 200 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£28.44
Price with VAT:
£34.12
NIDEC CORP
EVL-120B-5-K6-28JC24
DISCONTINUED BY MANUFACTURER, GEARHEAD, EVL SERIES, RIGHT ANGLE, FRAME SIZE: 120, B DESIGN VERSION, RATIO: 5:1, 2-STAGE, MOUNTING SYLE: KEYED SHAFT, 9 ARC MIN, 28JC24 MOTOR MOUNTING CODE
✓ IN STOCK!
£163.36
Price with VAT:
£196.03
NIDEC CORP
EVB-180-3-K6-38KC32
DISCONTINUED BY MANUFACTURER, GEARHEAD, EVB SERIES, RIGHT ANGLE, FRAME SIZE: 180, RATIO: 3:1, 2-STAGE, MOUNTING STYLE: KEYED SHAFT, 6 ARC-MIN, 38KC32: MOTOR MOUNTING CODE
✓ IN STOCK!
£228.70
Price with VAT:
£274.44
NIDEC CORP
JAPAN SERVO CO LTD
6H15N-21
GEAR HEAD, 37.50 OZ-IN, 2.6 X 10.4 NM, STANDARD SHAFT, 15 RATIO, 120 RPM, 3.0 W, 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£7.08
Price with VAT:
£8.50
NIDEC CORP
JAPAN SERVO CO LTD
6H1800N-21
GEAR HEAD, STANDARD SHAFT, 1800 RATIO, 1 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£7.63
Price with VAT:
£9.15
NIDEC CORP
JAPAN SERVO CO LTD
6H180N-21
GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, STANDARD SHAFT, 180 RATIO, 10 RPM, 3.0 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£8.71
Price with VAT:
£10.45
NIDEC CORP
JAPAN SERVO CO LTD
6H25N-21
GEAR HEAD, 76.39 OZ-IN, 5.4 X 10.4 NM, SINGLE SPEED, 25 RATIO, 56 RPM, 2.40 X 2.40 INCH, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£9.68
Price with VAT:
£11.62
NIDEC CORP
JAPAN SERVO CO LTD
8H100N-21
DISCONTINUED BY MANUFACTURER, GEAR HEAD, SINGLE SPEED, 555.56 OZ-IN, 39.2 X 10.4 NM, 100 RATIO, 0.75 RPM, 3.15 X 3.15 INCH, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£16.80
Price with VAT:
£20.16
NIDEC CORP
JAPAN SERVO CO LTD
8H15FBN-100
GEAR HEAD, PALM MINI PLUS TYPE, 1.2 NM, 170 OZ-IN, 100 W, 14 VDC
✓ IN STOCK!
£25.59
Price with VAT:
£30.71
NIDEC CORP
JAPAN SERVO CO LTD
8H15N-21
GEAR HEAD, STANDARD SHAFT, 152.78 OZ-IN, 10 X 10.4 NM, 15 RATIO, 15 W, 120 RPM, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£9.80
Price with VAT:
£11.76
NIDEC CORP
JAPAN SERVO CO LTD
8H1800N-21
GEAR HEAD, STANDARD SHAFT, 555.56 OZ-IN, 39 X 10.4 NM, 1800 RATIO, 1 RPM, 20 W, 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£26.02
Price with VAT:
£31.22
NIDEC CORP
JAPAN SERVO CO LTD
8H36N-21
GEAR HEAD, STANDARD SHAFT, 444.44 OZ-IN, 36 RATIO, 50 RPM, 20 W, 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£20.42
Price with VAT:
£24.51
NIDEC CORP
JAPAN SERVO CO LTD
8H375N-21
GEAR HEAD, 8H10XN DECIMAL GEAR 1 / 35 LB-IN, 375 RATIO, 4.8 RPM, 2-15 W, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£14.15
Price with VAT:
£16.99
NIDEC CORP
JAPAN SERVO CO LTD
8H5N-21
GEAR HEAD, 1.8 LB-IN, 5 RATIO, 360 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£7.08
Price with VAT:
£8.50
NIDEC CORP
JAPAN SERVO CO LTD
8H60N-21
GEAR HEAD, STANDARD SHAFT, 83.33 OZ-IN, 5.9 X 10.4 NM, 6 RATIO, 20 W, 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£13.92
Price with VAT:
£16.70
NIDEC CORP
JAPAN SERVO CO LTD
8H90N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 34 LB-IN, RATIO 90, 20 RPM, 6-15 W, 3.15 X 3.15 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£8.71
Price with VAT:
£10.45
NIDEC CORP
US MOTORS
R266/D0718027N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 1750RPM, 4.3HP, 7.63 GEAR RATIO
✓ IN STOCK!
£200.21
Price with VAT:
£240.25
NIDEC CORP
JAPAN SERVO CO LTD
6H100FN
DISCONTINUED BY MANUFACTURER, GEARHEAD, OFFSET, SMOOTH SHAFT, 4-BOLT MOUNT
✓ IN STOCK!
£122.19
Price with VAT:
£146.62
NIDEC CORP
NIDEC SERVO
6H7.5FBN
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 7.5:1 RATIO, 120RPM
✓ IN STOCK!
£43.40
Price with VAT:
£52.08
NIDEC CORP
JAPAN SERVO CO LTD
6H12.5N-21
GEAR HEAD, 41.67 OZ-IN, 2.9 X 10.4 NM, SINGLE SPEED, 12.5 RATIO, 110 RPM, 2.40 X 2.40 INCH, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£6.54
Price with VAT:
£7.84
NIDEC CORP
JAPAN SERVO CO LTD
6H120N-21
GEAR HEAD, STANDARD SHAFT, 120 RATIO, 15 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£8.17
Price with VAT:
£9.81
NIDEC CORP
JAPAN SERVO CO LTD
6H30N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 30 RATIO, FOR 60 MM SQUARE, INDUCTION, REVERSIBLE
✓ IN STOCK!
£7.63
Price with VAT:
£9.15
NIDEC CORP
JAPAN SERVO CO LTD
6H50N-21
GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, SINGLE SPEED, 50 RATIO, 28 RPM, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£10.64
Price with VAT:
£12.76
NIDEC CORP
JAPAN SERVO CO LTD
6H60N-21
GEAR HEAD, 7.0 LB-IN, 60 RATIO, 30 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£8.71
Price with VAT:
£10.45
NIDEC CORP
JAPAN SERVO CO LTD
6H6N-21
GEAR HEAD, 0.78 LB-IN, 6 RATIO, 300 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£7.08
Price with VAT:
£8.50
NIDEC CORP
JAPAN SERVO CO LTD
6H90N-21
GEAR HEAD, STANDARD SHAFT, 90 RATIO, 20 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£8.17
Price with VAT:
£9.81
NIDEC CORP
JAPAN SERVO CO LTD
8H180N-21
GEAR HEAD, STANDARD SHAFT, 180 RATIO, 15 W, 10 RPM, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£17.55
Price with VAT:
£21.06
NIDEC CORP
JAPAN SERVO CO LTD
8H18N-21
GEAR HEAD, 8H10XN DECIMAL GEAR, 6.3 LB-IN, 18 RATIO, 100 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
✓ IN STOCK!
£10.89
Price with VAT:
£13.07
NIDEC CORP
JAPAN SERVO CO LTD
8H250N-21
GEAR HEAD, SINGLE SPEED, 555.56 OZ-IN, 39.2 X 10.4 NM, 250 RATIO, 5.5 RPM, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£15.13
Price with VAT:
£18.15
NIDEC CORP
JAPAN SERVO CO LTD
8H30FBN-100
GEAR HEAD, FYD SERIES, 290 OZ-IN, 2100 MN-M, 30 RATIO, 6.7-50 R/MIN
✓ IN STOCK!
£27.23
Price with VAT:
£32.67
NIDEC CORP
JAPAN SERVO CO LTD
8H7.5N-21
GEAR HEAD, SINGLE SPEED RANGE, 134.72 OZ-IN, 9.5 X 10.4 NM, 7.5 RATIO, 187 RPM, 3.15 X 3.15 INCH, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£14.15
Price with VAT:
£16.99
NIDEC CORP
JAPAN SERVO CO LTD
8H90N-21
GEAR HEAD, 34 LB-IN, RATIO 90, 20 RPM, 6-15 W, 3.15 X 3.15 INCH, FOR UIH SERIES INDUCTION MOTORS
✓ IN STOCK!
£18.76
Price with VAT:
£22.51
NIDEC CORP
JAPAN SERVO CO LTD
8H9N-21
GEAR HEAD, STANDARD SHAFT, 93.06 OZ-IN, 9 RATIO, 200 RPM, 15 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£12.53
Price with VAT:
£15.03
NIDEC CORP
JAPAN SERVO CO LTD
8H225N-3
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 225 R/MIN, REDUCTION RATIO 1: 50/60 HZ, FOR MOTORS WITH CONTROLLER UNITS
✓ IN STOCK!
£7.63
Price with VAT:
£9.15
NIDEC CORP
JAPAN SERVO CO LTD
8H6N
DISCONTINUED BY MANUFACTURER, GEAR HEAD, 6 R/MIN, REDUCTION RATIO 1:250 50 HZ, REDUCTION RATIO 1:300 60 HZ, FOR REVERSIBLE MOTORS
✓ IN STOCK!
£7.63
Price with VAT:
£9.15
NIDEC CORP
JAPAN SERVO CO LTD
6DG25-21
GEAR HEAD
£43.32
Price with VAT:
£51.99
Repair Yours
Contact Us
NIDEC CORP
JAPAN SERVO CO LTD
6H6FB-1
GEAR HEAD
£9.71
Price with VAT:
£11.65
Repair Yours
Contact Us
NIDEC CORP
CONTROL TECHNIQUES
DXE-480/PG142-RDCR
GEAR HEAD 10:1 RATIO
£2,823.49
Price with VAT:
£3,388.19
NIDEC CORP
6H9FBN-1
DISCONTINUED BY MANUFACTURER, VARIABLE SPEED BRUSHLESS DC MOTOR, WITH GEAR HEAD, 24VDC, 10W, 9:1 RATIO
£71.49
Price with VAT:
£85.79
NIDEC CORP
US MOTORS
E429
SYNCROGEAR GEAR MODULE, RIGHT ANGLE, 6 FRAME, SINGLE REDUCTION, RPM 190, RATIO 9.0, MAX HP OUTPUT 2.00
£424.70
Price with VAT:
£509.64
NIDEC CORP
VRT-110B-50-F3-19EB16
DISCONTINUED BY MANUFACTURER, GEAR BOX, 50:1 RATIO, FRAME SIZE 110
£352.12
Price with VAT:
£422.54
NIDEC CORP
6H3-21
GEAR HEAD, 2W OUTPUT, 3:1 RATIO
£27.64
Price with VAT:
£33.16
Repair Yours
Contact Us
NIDEC CORP
LEROY SOMER
CB3133SB6
DISCONTINUED BY MANUFACTURER, GEAR HEAD, COMPABLOC SERIES, INTEGRAL MOUNTING, 17 L/MIN, 82.35, ISO VG220
£492.99
Price with VAT:
£591.59
